Abstract Title: A messy story ? a case study of Secorocs Process flow of DTH-pipes Presentation date: 2010-06-02 Course: Bachelor thesis in businessAuthor: Kristoffer ForsmanAdvisor: Kjell GustafssonKeywords: Management control, process control, lean production, Process flow analysisPurpose: The purpose of this bachelor thesis is to develop an overview of the Process flow for a specific product, and with the help of this mapping based on a lean production philosophy show possible improvement proposals and how these can lead to a more efficient Process flow.Methodology: I have used a case study of Secorocs DTH-pipes and my primary data are gathered through interviews and observations. I have used theoretical framework to establish a Process flow analysis. This is to obtain data on process activities and whether they are creating value or not. This leads to a current mapping of the situation in Secoroc on DTH-pipes and then analyzed and suggestions for improvement are developed.Conclusions: That by using the above mentioned mapping of Process flow of DTH-pipes, problem areas could be illustrated.

Uppsatsen behandlar ämnet genus och genusframställningen i barnböcker nu, och för 50 år sedan. För att komma fram till ett resultat har två analysmetoder använts, Nikolajevas mimetiska metod samt en semiotisk bildanalysmetod. Resultatet visar att det skett en förändring av genusframställandet i barnböcker de senaste femtio åren och att den största förändringen skedde i mitten på 60-talet..

Increased competition in the IT industry has sparked a need for developing faster innovation processes with more predictable output. One of the biggest issues when it comes to achieving a faster flow through the innovation process lies in managing its high degree of variation. Proposing a solution to this problem, Lean Software Development (LSD), was developed to provide a framework for how IT companies should organize its software development process to achieve increased speed and quality. This study examines to which extent LSD, as a set of values, principles, methods and tools, can be used to improve flow efficiency in the innovation process. A case study of a multinational IT company was made by conducting ten semi-structured interviews with current employees.

The purpose of this study is to increase the understanding of activities, flows and waste in a company's production process. By performing a value stream analysis, non-value adding activities are identified in a production process and then the suggested improvements that can reduce lead times will be stated. The value-stream mapping identifies the flow of information and the flow of material in a production process and this provides the basis for the identification of non-value adding activities.We conducted the study at Lammhults Möbel AB in Lammhult Sweden, where the production flow of Spira-21 has been investigated. This to identify any non-value adding activities that affect the flow negative and consumes time and money in a non-value adding way.A reasonable approach for the project was taken by studying the methodologies and theories. We conducted interviews and site surveys at Lammhults Möbel AB where the flow of information and material in the production process were investigated.

Starting out as a minor form of amusement, the game industry has become one of the most lucrative andsuccessful in the entertainment business competing against giants such as television, movies and music.As the internal competition within the developer community grows companies work hard at discoveringnew ways to attract and keep customers. By having a playcentric approach focusing on user experiencethey hope to achieve that goal. This thesis describes the process of designing a game with focus on theplayer. We apply the concept of flow on game development and investigate through research throughdesign if we are able to create a game that keeps the player in flow.Play tests showed several elements such as control issues and too difficult challenges early in the game,affecting the possibility for players to experience flow while playing. These negative factors came to becalled flowleakers.

In the last decades, lean production has proven to be one of the most important organizational paradigms in manufacturing. The lean concept has also spread into the service industry where it is applied within a range of different areas. The wide applicability of lean principles has spurred the authors of this study to apply the principles in the context of the operations of a Swedish remand prison. The thesis examines the process a client of the remand prison Häktet Kronoberg goes through from the time of arrest until he/she is released or convicted and transferred to jail. Based on lean tools and principles, the thesis maps and analyses this process.

The thesis work has been carried out at Volvo Aero Corporation (VAC) in Trollhättan. VAC has entered a partnership as developing and producing partner with engine manufacturer Pratt & Whitney and is currently at the starting phase of producing the turbine rear frame (TEC) to the engine PW1000.The purpose of this study was to create a report on process level that describes the conditions and the potential with PW1000 TEC to reach the product cost calculation taking into account lead times and describe alternative method solutions.The report describes a comparison between the present flow (2012), a flow based on product cost calculation (2016) and a potential flow (2016). The work has mainly been based on acquiring the knowledge and information available to inspect the present flow; this has been done by workshop observations, meetings and gathering of the information that is available on the work site for the PW1000 TEC.The information obtained has been merged into an Excel document, called Roadmap. It serves as a roadmap with current situation as the start and the potential flow for 2016 as the goal. With the roadmap as a tool, assumptions have been taken considering the flow and how it will change, where processes have been eliminated, reduced or marked as a problem..

 This report deals with thecollaborative project between FagrellProdukt Utveckling AB and studentsfrom the Faculty of Science andTechnology at Uppsala University. Theoverall objective of the project wasin addition to developing students'abilities, to help Fagrell withverification and development ofFagrells prototype, Fundamental flowreactor, for flow chemistry. Theuniqueness of Fagrells flow reactor isthat it should be simple andaffordable compared to competing flowreactors in the market.The verification was done bylaboratory and simulation sessions.The verification shows that Fagrellsidea on how to construct a flowreactor is very good.The development included bothtechnology and business. The result ofdevelopments can be helpful for thecommercialization of Fagrell flowreactor..

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

Handling product returns has become a critical activity for organizations as the volume of gods flowing back through the supply chain rapidly increases. Few research studies have published specific empirical data concerning the reverse logistics practices of companies. Information technology and information support has long been recognized as a competitive weapon ? capable of enhancing company performance and achieving efficient reverse logistics. Reverse logistics is very unlike the forward, as it is more reactive and also has less visibility.

In a global economy it is important to understand what project management is and how it functions in a contemporary company. This report includes an empirical case study of a project flow, which was conducted in the department Packaging Concept (PC) which is a part of Stora Enso. As all of PC´s customer enquiries are unique and must be considered an individual project, PC continuously works in projects. An analysis of the project flow was conducted based on interviews at and visits to PC as well as relevant documents distributed by the department. The report gives an understanding and analysis of how PC works in projects.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

Detta  examensarbete  undersöker  skillnaden  i  tre  olika  nybörjargruppers  upplevda flow  då  de  spelat  Magicka  (2011)  med  motståndarantal  som  den  enda  skiljande variabeln.   Undersökningen   baseras   bland   annat   på   Csikszentmihalyis   (1990) flowteori och Caillois (2001) teori om att tävlande slutar vara roligt då det  urartar i kaos.  Syftet  med  examensarbetet  har  varit  att  hitta  när  mest  flow  uppstår  då nybörjare på Magicka (2011) spelar mot  en viss motståndartyp, samt om  detta flow bryts  när  för  många  motståndare  introduceras.  Undersökningen  har  visat  att  nio motståndare har resulterat i betydligt mer flow än tre, medan skillnaden mellan nio motståndare  och  18  har  varit  obetydlig.  Examensarbetet  har  dock  inte  lyckats kvantifiera  var  flow  övergår  till  kaos  med  den  testgrupp  och  motståndartyp  som använts.  Framtida  forskning  skulle  exempelvis  kunna  undersöka  på  vilket  sätt  ett varierande  motståndarantal  skulle  påverka  flow  för  en  mer  erfaren  testgrupp  som spelar mot andra motståndartyper..